For the efficiency in the transportation of some of those major fluids such as petroleum products, gasses, and steam, pipeline system is used. In line with this, just as any other form of transport is subjective to repair and inspection for damages, the same is done for such a system. One of the best ways used in pipeline inspection is pigging. In relation to this, there are a number of important tips and procedures for pigging a pipeline.
Transportation of pipeline products is always an ongoing business and since wearing out and tear is very prone on the inner side of such systems, an inspection should always be carried out on the inner side of the pipes. Pigging is the recent commonly known method used for such inspections as well as fixing the problems.
The method of pigging was invented with the purpose of cleaning the inner side of such pipes alongside scraping out any kind of deposits and rust that has accumulated on the inner side of pipes. With the recent technology, the method has as well been used to measure out the diameters of many pipes, detecting leakages and also detecting any part of the pipes that has been worn out.
To help detect and perform the various problems listed above, the entire method work by the use of sensors and electronics fitted with magnetic fields and ultrasounds systems. The pigs are inserted on one end of pipe or pipeline system and allowed to move to the next receiving end where they are collected. Before being inserted, they are fixed with recording devices that help in the collection of data in relation to the condition of these pipes, the location of a defect as well as how severe the defect is.
Pigging is as well used for batch transportation. There are no specific pipelines for a specific product just that the products are transported one at a time. To help separate the various products batching pigs are used, therefore, doing away with any contact of the various products that may occur within the system.
In the third place is the specialty pigging method. The method is mainly used to detach a section in the pipeline system to help allow maintenance work on the system to be performed. It works by maintaining the pressures in the pipeline from both of the sides till the entire remedial work in the system is concluded.
Pipelines should always be fitted with a coating to help reduce damages such as corrosion and rust. The coating is often subjective to wearing out and therefore, as a maintenance practice, the coating should always be renewed. In this case, pigging is one of those best procedure that can be used to facilitate the process. The most effective coating material for this case is the epoxy coating. The pigs are used in combination of the corrosion inhibitors that help in the distribution of coat in the entire perimeter of oil pipes.
The various pigging method has as well been designed for all the diameters of the pipes. All that is needed is to have the knowledge on the best method that will help fix a specific damage in pipes.
Transportation of pipeline products is always an ongoing business and since wearing out and tear is very prone on the inner side of such systems, an inspection should always be carried out on the inner side of the pipes. Pigging is the recent commonly known method used for such inspections as well as fixing the problems.
The method of pigging was invented with the purpose of cleaning the inner side of such pipes alongside scraping out any kind of deposits and rust that has accumulated on the inner side of pipes. With the recent technology, the method has as well been used to measure out the diameters of many pipes, detecting leakages and also detecting any part of the pipes that has been worn out.
To help detect and perform the various problems listed above, the entire method work by the use of sensors and electronics fitted with magnetic fields and ultrasounds systems. The pigs are inserted on one end of pipe or pipeline system and allowed to move to the next receiving end where they are collected. Before being inserted, they are fixed with recording devices that help in the collection of data in relation to the condition of these pipes, the location of a defect as well as how severe the defect is.
Pigging is as well used for batch transportation. There are no specific pipelines for a specific product just that the products are transported one at a time. To help separate the various products batching pigs are used, therefore, doing away with any contact of the various products that may occur within the system.
In the third place is the specialty pigging method. The method is mainly used to detach a section in the pipeline system to help allow maintenance work on the system to be performed. It works by maintaining the pressures in the pipeline from both of the sides till the entire remedial work in the system is concluded.
Pipelines should always be fitted with a coating to help reduce damages such as corrosion and rust. The coating is often subjective to wearing out and therefore, as a maintenance practice, the coating should always be renewed. In this case, pigging is one of those best procedure that can be used to facilitate the process. The most effective coating material for this case is the epoxy coating. The pigs are used in combination of the corrosion inhibitors that help in the distribution of coat in the entire perimeter of oil pipes.
The various pigging method has as well been designed for all the diameters of the pipes. All that is needed is to have the knowledge on the best method that will help fix a specific damage in pipes.
About the Author:
If you are looking for information about pigging a pipeline, pay a visit to our web pages online here today. Additional details are available at http://www.agiindustriespa.com now.
Aucun commentaire:
Enregistrer un commentaire